As a single piece packaging line supplier, I often get asked by plant managers and production leads: “What certifications do we actually need for our packaging line? It’s not just about getting the machine to run—it’s about staying compliant, avoiding downtime, and making sure your final product actually reaches store shelves.” Last month, I sat in on a call with a craft chocolate producer who’d spent six months installing a line they’d sourced overseas, only to hit a snag when their food safety auditor pointed out unmarked gaskets and a missing sanitation documentation trail. They’d overlooked two key certifications, and now they’re waiting on upgrades that’ll set them back another three months. That’s the kind of preventable mistake I want to help you avoid. Single Piece Packaging Line

For single piece packaging lines, the certifications you need don’t just check boxes—they’re tailored to how your line operates, the products it wraps, and where you’re selling. I’ve installed lines for everything from fresh bakery bread to pharmaceuticals, and each has a unique set of requirements. Let’s break this down by category, no jargon, and explain why each matters, not just what it is.
First, let’s start with industry-specific food safety certifications, because 70% of the inquiries I get for food and beverage lines prioritize these, and for good reason. If you’re packaging perishable goods—fresh produce, dairy, ready-to-eat meals, anything that goes to grocery stores or restaurants—you need line components that won’t leach chemicals or harbor bacteria. For lines serving North America, that means FDA 21 CFR Part 177.1520 certification for food contact materials. This isn’t a single sticker you slap on the machine; every part that touches food—gaskets, conveyor belts, film wrappers, even the grease used on motors within 12 inches of a food contact surface—has to be tested and documented as compliant. I once had a customer who skipped this for a line wrapping frozen pizza; their supplier had used a standard rubber gasket, and when heat during cooking caused a tiny amount of chemical transfer, they got a product recall that cost $120,000. That mistake cost more than the line itself would have, plus the certification.
If you’re operating in the EU or countries that follow European standards, instead of FDA, you’ll need EU 1935/2004 for food contact materials, and EN 1672-2 for food machinery hygiene. The difference here is that EN 1672-2 is more prescriptive about sanitation: it requires smooth, crevice-free surfaces so bacteria can’t grow, and documented clean-in-place (CIP) protocols if your line uses that. For customers in Canada, it’s CFIA requirements, which align closely with FDA but have stricter documentation for allergen control. We recently retrofitted a line for a cookie maker in Toronto that added a allergen-separated packaging module, and we had to ensure that the module’s components were certified to avoid cross-contamination—something that’s not explicitly required in some other regions but is non-negotiable in Canada.
Next, sanitation and washdown certifications, which are critical if your line is cleaned on a daily basis. Single piece packaging lines that handle wet products (like fresh pasta or produce) or require frequent deep cleans can’t use regular industrial machinery—those will rust, harbor mold, and fail safety inspections. Here, the two big ones are 3-A Sanitary Standard and IP67/IP69K for ingress protection. 3-A is widely used in dairy, beverage, and pharmaceutical industries; it’s a third-party certification that verifies all surfaces are non-porous, no dead spots for bacteria, and easy to disassemble for cleaning. I installed a 3-A certified line for a Greek yogurt maker last year, and they told me their inspection time dropped by 40% because the auditor could verify compliance in half the time. IP67 means the machine can be submerged in up to 1 meter of water for 30 minutes, which works for light washdowns, while IP69K is for high-temperature, high-pressure washdowns—if you’re using steam or chemical cleaners at 80°C, that’s the certification you need. A customer who bought a line without IP69K for their juice bottling line had to replace 90% of the control panels after six months of high-temperature cleaning, a $15,000 repair. That’s a certification that saves you money long-term.
Then there are product-specific certifications, which depend entirely on what you’re packaging. If you’re packaging pharmaceuticals or medical devices, ISO 13485 is non-negotiable. This standard covers quality management systems for medical devices, and your packaging line has to be certified to ensure that the packaging doesn’t contaminate the product, and that batch tracking is accurate. I worked with a medical device startup last year that was trying to get FDA clearance for a wound care product; their line didn’t have ISO 13485, so they had to pause their clinical trials for two months to upgrade the line, which cost them $50,000 in delayed funding. For consumer products, like beauty or personal care, you might need CPNI (Cosmetic and Toiletry Ingredient) compliance if you’re selling in the US, or EU Cosmetics Regulation (1223/2009) for the EU. If you’re packaging hazardous materials—cleaning products, pesticides, chemicals—you need OSHA 1910.120 for hazardous waste operations, and UN certification for packaging that’s safe for transport. A pest control company I work with had their line denied at a warehouse because their hazardous chemical packaging line didn’t have UN certification, so they had to re-package 2,000 units at a cost of $8,000. That’s another preventable cost.
Electrical and safety certifications are the unsung heroes—most customers don’t think about these until an inspector shows up. For lines in the US, that’s UL 508A for industrial control panels and UL 198 for packaging machinery. UL 508A ensures that the control panel is wired correctly, has proper overcurrent protection, and won’t cause a fire. I’ve seen a line fail inspection because a wiring harness was not UL-listed; the inspector made them rework all the internal wiring, which took three days of downtime. For the EU, it’s CE marking, which covers electrical safety (EN 60204-1), machinery safety (EN ISO 12100), and sometimes EMC (electromagnetic compatibility, EN 61000-6-2) to make sure your line doesn’t interfere with other factory equipment. If you’re selling in Australia or New Zealand, you’ll need C-tick certification for EMC. A customer in Sydney recently had their line rejected at the port because it lacked C-tick, so they had to pay for local testing, a delay of two weeks.
Batch tracking and traceability certifications are becoming more important every year, as regulators push for better product safety. For food products, that’s often GS1 compliance, which uses standardized barcodes and data formats so you can track a product from farm to shelf. If there’s a recall, you can pull all affected units in hours, instead of days. I installed a line for a snack food company that had a minor peanut cross-contamination issue; GS1 compliance let them identify exactly 1,200 units out of 50,000, so they only recalled those, saving $100,000 in product replacement costs. For pharmaceuticals, it’s DSCSA (Drug Supply Chain Security Act) in the US, which requires serialization of each packaging unit to prevent counterfeits. A pharmaceutical client of mine had to upgrade their line last year to meet DSCSA; the good news is that the certification they got made their line eligible for a $20,000 tax credit for small businesses.
Now, a common question I get: “Do these certifications apply to the entire line, or just individual components?” The answer is both. Many customers think if they buy a motor that’s UL-listed and a conveyor belt that’s FDA-compliant, the whole line is certified. That’s not true. The machine as a whole has to be tested to ensure that all components work together safely and in compliance. For example, a control panel might be UL-listed, but if it’s mounted on the frame of a packaging line that’s not properly grounded, the whole line won’t pass UL 198. I always recommend that customers work with a supplier that handles end-to-end certification, so they don’t have to juggle multiple third-party auditors. That’s a big part of why I don’t just sell equipment—I help customers navigate the certification process at every step.
I also want to address a misconception: some customers think “self-certification” is enough. That’s risky. Third-party certifications (from organizations like NSF, Underwriters Laboratories, or TÜV) are what regulators accept during inspections. Self-declaration might work for some small, local operations, but if you’re selling to grocery chains, big box stores, or overseas markets, third-party certification is mandatory. I once had a customer who tried to use self-declared food contact materials for a line going to Walmart; Walmart’s inspection team rejected it immediately, and they lost a $500,000 annual contract. That’s not a risk you want to take.
As a supplier who’s been installing single piece packaging lines for 12 years, I’ve seen every mistake there is. The ones that cost the most are almost always the ones where a customer skipped a key certification, thinking it’s just paperwork. The good news is that most of these certifications are straightforward to plan for upfront, not as a costly retrofit later. If you’re in the market for a new single piece packaging line, don’t just ask “Does it work?” Ask “What certifications does it come with, and can I have a copy of the audit report?” If a supplier can’t give you a clear, detailed answer, that’s a red flag.

If you’re currently navigating certification requirements for your existing line, or you’re in the market for a new single piece packaging line and want to make sure you’re not missing anything, I’m here to help. I’ve worked with small craft producers and large multinational brands, and I can walk you through exactly what certifications you need based on your product, location, and sales goals. There’s no one-size-fits-all, but I can break it down simply, so you don’t hit a snag mid-install or after your line is up and running. We can schedule a call to discuss your specific needs, answer any questions you have, and make sure your packaging line is compliant, safe, and ready to get your product to market without delays.
Heat Shrink Tunnel References:
- U.S. Food and Drug Administration. (2023). Food Contact Substances: 21 CFR Part 177. Retrieved from FDA.gov
- European Commission. (2004). Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food. Official Journal of the European Union
- International Organization for Standardization. (2016). ISO 13485:2016, Medical devices — Quality management systems — Requirements for regulatory purposes
- Underwriters Laboratories. (2022). UL 198 Standard for Packaging Machinery Safety
- U.S. Drug Enforcement Administration. (2023). Drug Supply Chain Security Act (DSCSA) Requirements. Retrieved from DEA.gov
- National Sanitation Foundation. (2021). 3-A Sanitary Standards for Food Equipment. Retrieved from NSF.org
- International Electrotechnical Commission. (2020). EN 60204-1: Safety of machinery — Electrical equipment of machines — Part 1: General requirements
Shanghai Peifu Packaging Machinery Co., Ltd.
We are one of the leading manufacturers and suppliers of single piece packaging line in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please rest assured to buy customized single piece packaging line from our factory.
Address: No.1111, Xinlin Road, Fengxian District, Shanghai, China
E-mail: cathychensupplier@gmail.com
WebSite: https://www.peifupackaging.com/