As someone who’s been in the pig heat lamp supply business for over 12 years, I’ve sat across from more pig farmers than I can count, and one question always comes up—usually when they’re staring at a half-melted heat lamp casing or a pig pen that’s been too warm, leaving their piglets listless. Overheating isn’t just a nuisance; it’s a dangerous problem. Piglets, especially newborn ones, can’t regulate their body temperature the way adult hogs do. If a heat lamp runs too hot, it can cause dehydration, stress, and even death in a matter of hours. And for farmers, that means lost income, wasted feed, and a lot of stress. That’s why I’ve spent years refining not just the lamps we sell, but the guidance we give our customers to keep them running safely. Pig Heat Lamp

Let’s start with the basics. Why do pig heat lamps overheat in the first place? A lot of it comes down to setup, not the lamp itself. I’ve seen farmers hang a lamp 6 inches above a heat mat, or leave it plugged in 24/7 without a break. I’ve also seen people use the wrong wattage lamp for their pen size—swapping a 100-watt bulb for a 250-watt one because they thought “hotter is better.” The truth is, every part of the system matters. Even the way you house the lamp plays a role. If it’s in a tight, enclosed space with no ventilation, the heat gets trapped, and the lamp’s internal temperature spikes. I remember a customer a few years back, a small-scale farmer in Iowa, who had a batch of 10-day-old piglets lose 3 of them because he hung the lamp too close to a wooden rafter above the pen. The rafter caught a little bit of heat residue, which made the lamp stay hotter than it should, and the bulb burned out prematurely before he even noticed. That’s the kind of avoidable mistake we work to prevent with every customer.
First step to preventing overheating: get the lamp height right. This isn’t a guess—there’s a science to it, and we test every lamp we sell to give clear guidelines. For standard 250-watt infrared heat lamps (the most common type for piglets), the ideal hanging height is 18 to 24 inches above the floor of the pig pen, or 12 to 18 inches above a heat mat. Too low, and the direct heat doesn’t have a chance to dissipate, leading to localized overheating; too high, and it’s not effective for keeping piglets warm. I always tell farmers to adjust this height based on their piglets’ behavior. If they’re all huddled right under the lamp, that means it’s too low. If they’re staying as far away as possible from the lamp, or panting heavily, it’s too high. It’s a simple, real-time check that takes 30 seconds, and it’s saved more customers from overheating incidents than any other single step.
Next, wattage matching. This is another area where I see a lot of missteps. A 50-sow pen needs a different lamp than a 20-sow pen. If you use a lamp that’s too high-wattage for a small pen, you’re just wasting energy and risking overheating. We include a wattage guide with every lamp we ship, but I’ll break it down here: for a pen with 1 to 10 piglets, a 150-watt lamp works best; 11 to 20 piglets, 200 watts; 21 to 40 piglets, 250 watts. Anything over 40 piglets, you might even need two smaller lamps instead of one large one—this spreads the heat more evenly and reduces the chance of a hot spot. I had a customer in Ohio last year who switched from a single 300-watt lamp for his 35-piglet pen to two 200-watt lamps. He told me later that his electricity bill dropped by 12% in a month, and he didn’t have a single overheating issue. That’s the kind of result we love to see.
Ventilation is non-negotiable. I can’t stress this enough. Pig pens, especially farrowing crates, can get stuffy—manure, moisture, and the animals’ own body heat build up quickly. If there’s no airflow, the heat from the lamp has nowhere to go, so it cycles back up around the lamp, making it run hotter. Even a small amount of ventilation makes a difference. We suggest leaving a 1-inch gap at the top of the pen walls, or using a farrowing crate with a vented back panel. If you’re using a lamp in a barn, make sure the barn has natural cross-ventilation, or add a small exhaust fan if it’s a closed structure. I’ve had customers who tried to skip ventilation to “keep more heat in” in the winter, only to find the lamp’s internal temperature rose by 15 degrees in just a few hours. That’s a dangerous trade-off.
Then there’s the lamp’s own safety features. Not all heat lamps are created equal. When I started in this business, a lot of lamps had simple metal casings that could get too hot to touch on the outside. Now, we offer lamps with heat-resistant polycarbonate casings that stay cool to the touch even when running. But even with that, you need to check the lamp’s wiring regularly. Loose or frayed wires can cause the bulb to work harder, leading to overheating. We recommend inspecting the lamp’s cord every two weeks—look for cracks, frays, or signs of burning. If you see any, replace the cord immediately, don’t try to tape it up. I’ve seen a tape-up job cause a wire to spark and melt the lamp casing, which could have started a fire. It’s not worth the risk.
Thermostats are a game-changer, too. A lot of farmers run their heat lamps on a standard on/off switch, which means the lamp runs non-stop when it’s cold. That’s a surefire way to overheat. A thermostat keeps the lamp at a consistent temperature—you set it to 90 to 95 degrees Fahrenheit for newborn piglets, and it turns the lamp off when the pen hits that temp, back on when it drops. We sell thermostats specifically calibrated for pig heat lamps, and we always tell our customers to use them. One customer in Minnesota, who had to deal with cold winter temperatures, switched to a thermostat last year. He said before, he had to get up every four hours to check the lamp, and he still had two overheating incidents a month. After using the thermostat, he only checks the pens once a day, and there hasn’t been an overheating issue since. It’s an investment that pays for itself in peace of mind, not to mention fewer lost piglets.
Another thing to watch for: bulb type. Not all infrared bulbs are the same. Some bulbs are designed to emit more heat than others, even if they have the same wattage. We use quartz infrared bulbs in our lamps, which are designed to emit consistent, gentle heat without spiking temperatures. I’ve had customers who tried to use regular incandescent bulbs as a cheaper alternative, and those bulbs run much hotter, leading to way more overheating. Incandescent bulbs also burn out faster, so you’re actually spending more money in the long run replacing them. We always advise using the bulbs that match your lamp—we sell replacement bulbs, and we can tell you exactly which ones work for each model.
What about common mistakes that might seem small, but add up? For example, hanging the lamp too close to flammable materials. I mentioned that Iowa farmer who had a problem with a rafter—wood, straw, even plastic troughs can catch heat residue and cause the lamp to run hotter. Make sure the lamp is at least 18 inches away from any walls, rafters, or other equipment. If you’re using a lamp in a pen with straw bedding, keep the straw at least a foot away from the lamp’s area, too. I once had a customer in Texas who had a fire start because a piece of straw blew under the lamp and caught heat—luckily, he caught it early, but it was a scare that could have been avoided with a little extra space.
Regular maintenance is key. I tell every customer to do a full lamp check once a week. That means turning the lamp off, unplugging it, letting it cool for at least 30 minutes, then taking it apart to clean the inside. Dust and dirt can build up on the bulb and the casing, acting as an insulator and making the lamp run hotter. Wipe the bulb with a soft cloth (don’t use harsh chemicals, that can damage the quartz), and clean the casing with a mild soap solution. I’ve had customers who skipped cleaning their lamps for months, and when they finally checked, the bulb was so covered in dust that it was running 20 degrees hotter than it should. That’s a simple fix that prevents a lot of problems.
Now, let’s talk about what to do if you do notice signs of overheating. If your piglets are panting, staying far from the lamp, or losing weight, that’s a sign the lamp is too hot. First, check the height—lower it a few inches if they’re huddled, raise it if they’re too far. Check the ventilation—open a vent, move a fan to blow towards the pen. Make sure the bulb is the right wattage, and that there’s no dust on it. If you’re using a thermostat, check that it’s calibrated correctly—sometimes they can get out of sync, so testing it with a thermometer is a good idea. We always recommend keeping a mini thermometer in each pig pen to monitor temperatures—it’s a small tool that takes the guesswork out of it.
At the end of the day, overheating is almost always preventable. It’s not about buying the most expensive lamp, or the fanciest equipment—it’s about paying attention to the details that keep your piglets safe and healthy. We’ve been in this business because we care about pig farmers—we don’t just sell heat lamps, we want you to have success. That’s why we put so much effort into making our lamps easy to use, and into providing clear, practical guidance for every customer.

If you’re a farmer looking for a reliable pig heat lamp, or if you’ve been dealing with overheating issues and need help figuring out the right setup, we’re here to help. We can walk you through wattage selection, height guidelines, and even how to set up ventilation for your specific pen. We’ve worked with small family farms and large commercial operations, so we know what works for every kind of setup. Don’t let overheating be a hassle for your piglets—reach out to us to discuss your needs, and we’ll help you find the right solution.
Pet Heat Bulb References
- American Association of Swine Veterinarians. (2021). Best Practices for Farrowing Pen Environment and Piglet Thermal Care.
- University of Extension Services. (2020). Managing Heat Stress in Newborn Swine.
- National Pork Board. (2019). Equipment Safety Guidelines for Pig Rearing Facilities.
- Journal of Swine Health and Production. (2018). Thermal Regulation and Environmental Requirements for Neonatal Swine.
- Agricultural Equipment Manufacturer’s Association. (2022). Safety Standards for Livestock Heating Devices.
Haining Guanyi Farm Co., Ltd.
Haining Guanyi Farm Co., Ltd. is well-known as one of the leading pig heat lamp manufacturers and suppliers in China. Please rest assured to wholesale high quality pig heat lamp at competitive price from our factory. For more information, contact us now.
Address: Room 15D, BLS Building, No.338 Haining Avenue, Haining City, Zhejiang, China
E-mail: info@zjguanyi.com
WebSite: https://www.guanyifarm.com/