If you’re a process engineer, plant manager, or anyone relying on multistage pumps for liquid transfer—whether in water treatment, oil and gas, food and beverage, or chemical processing—you’ve probably stared at your monthly utility bill and wondered: why does my multistage pump use so much power? I get that question a lot, both from seasoned operators who’ve managed pump fleets for decades and from new engineers who just added their first set of multistage pumps to a design. As a multistage pump supplier, I don’t just sell equipment; I help customers figure out how to run their pumps efficiently, which means breaking down exactly where power consumption comes from, what drives it, and how you can avoid wasting energy. Multistage Pump

First, let’s cut through the jargon and start with the basics: what a multistage pump is, and how its power use differs from a single-stage pump. A single-stage pump has one impeller that moves liquid and builds pressure. A multistage pump has two or more impellers stacked in a single casing, each stage adding a little more pressure, which makes it ideal for applications that need high discharge pressure without having to use a large, bulky single-stage pump. That extra pressure, though, translates to higher power demand—simply put, more pressure means more work for the pump, and more work means more power. But it’s not just the number of stages. Power consumption depends on a handful of interrelated factors, and understanding each one is key to calculating your pump’s real usage, not just the generic numbers from a spec sheet.
Let’s start with the core formula for pump power, because this is where science meets real-world use. The mathematical equation for hydraulic power (the actual energy transferred to the liquid being pumped) is straightforward: Hydraulic Power (in kilowatts, kW) = (Flow Rate in liters per second × Total Head in meters × Liquid Density in kilograms per liter) / 102. Total head is the total pressure the pump has to build, which includes the static head (the vertical distance liquid needs to move), friction head (the energy lost to pipe resistance, fittings, valves, etc.), and any pressure requirements at the discharge end.
But here’s the catch: hydraulic power is the ideal power needed to move the liquid, but your pump’s motor doesn’t operate at 100% efficiency. That’s where brake horsepower (BHP) comes in, which is the actual power the pump shaft requires. BHP = Hydraulic Power / Pump Efficiency. Then, to get the electrical power your facility has to draw from the grid, you divide BHP by the motor’s efficiency (and add a small amount for drive losses if you’re using a VFD, or variable frequency drive). That means if your pump’s efficiency is 70% and your motor is 95%, the electrical power draw will be roughly 1.5 times the hydraulic power—squishy numbers, sure, but that’s the gap between what you want the pump to do and what it actually takes to run.
Now, let’s talk about the biggest drivers of a multistage pump’s power consumption, because these are the things you can control or at least measure, instead of just guessing.
First, number of stages and total head. Since each impeller adds a fixed amount of head (called stage head), a multistage pump with 10 stages will build 10 times the head of a single impeller, so long as flow rate stays the same. For example, a 5-stage pump moving 100 liters per minute with a total head of 150 meters will use way less power than a 15-stage pump moving the same flow at 450 meters of head. That’s not just a small difference—for water, the density is 1 kg per liter, so the hydraulic power for the 5-stage pump is (100 l/min / 60) × 150 m × 1 / 102 = ~2.45 kW, while the 15-stage pump is ~7.35 kW, almost three times as much. That’s why matching the number of stages to your actual required head is critical: too many stages and you’re paying for power you don’t need.
Second, flow rate. This is one that trips up a lot of operators. Pumps have a “best efficiency point” (BEP)—the flow rate where the pump and its impellers work at their most efficient, minimizing waste. Run a pump at 20% below BEP, and you’ll see a huge jump in power use for almost no gain in output. Run it at 20% above BEP, and efficiency drops too, though not always as sharply. For multistage pumps, this effect is even more pronounced because each impeller is designed to work in series; off-design flow causes recirculation inside the pump, which wastes energy as heat instead of moving liquid. I had a customer in the municipal water sector a few years back who was running a 12-stage booster pump 30% above BEP because their system demand had gone up unexpectedly, and they were shocked to see their power bill jump 28% in six months. Once we adjusted their system to add a second smaller multistage pump for peak demand, their overall energy use dropped by 19% without sacrificing any pressure.
Third, liquid properties. This is a big one that’s easy to overlook. The formula above uses water as the default, but if you’re pumping something thicker—like syrup, oil, or a chemical slurry—the density goes up, which directly increases hydraulic power. Viscosity also matters, even if it’s not obvious. Low viscosity liquids (like water) flow easily through impellers and pipes, so the pump can move them with less energy. High viscosity liquids require more force to move through the pump’s internal passages, which means higher friction losses inside the pump, lower pump efficiency, and higher power draw. For example, pumping crude oil with a viscosity of 100 centistokes (cSt) instead of water can increase power consumption by 15-25% for the same flow and head. If your liquid has solids in it—like a wastewater slurry—those solids can cause abrasive wear on impellers and casings over time, which reduces pump efficiency, so power use creeps up even as performance drops. That’s why regular maintenance is non-negotiable for multistage pumps in abrasive applications.
Fourth, system friction and pressure losses. Your pump’s total head isn’t just the vertical distance the liquid has to travel. It also includes friction loss from pipes, bends, valves, strainers, and any other components in the line. For example, a 100-meter vertical lift to a storage tank might sound like enough head, but if you have 50 meters of pipe, three 90-degree elbows, a globe valve, and a strainer, those add up to another 40 meters of friction head, so your total head is actually 140 meters, not 100. That means your pump has to work harder, use more power, and may even be undersized for the actual load. A lot of customers come to us with pumps that draw way more power than the spec sheet says, and we trace it back to unaccounted friction losses in their system.
Now, let’s talk about real-world power draw numbers, so you can put this in context. For light-duty applications, like boosting water pressure in a small residential building, a small 2-stage multistage pump moving 10 liters per minute at 50 meters of head will use roughly 0.5 to 1 kW of electrical power. For medium-duty applications, like a small water treatment plant or a food processing line pumping fruit juice, a 6-stage multistage pump moving 50 liters per minute at 120 meters of head will use between 3 and 5 kW. For heavy-duty industrial applications, like oil and gas transfer or large-scale wastewater treatment, a 12-stage pump moving 200 liters per minute at 300 meters of head can draw 20 to 30 kW, and some large multistage pumps for high-pressure applications can go up to 100 kW or more. These are ballpark numbers, of course—actual use will vary based on the factors we covered earlier.
But here’s the good news: multistage pumps are already more energy-efficient than people think, compared to alternatives like reciprocating pumps or multiple single-stage pumps. Where multistage pumps really shine is in applications that need variable pressure or consistent high pressure, because you can adjust their output with a VFD instead of throttling a valve, which wastes a lot of power. Throttling a valve on a pump that’s not at BEP can waste 30-50% of the pump’s power as heat, while a VFD adjusts the motor speed to match the actual demand, cutting waste dramatically. For example, a chemical plant I worked with switched from throttling their 8-stage multistage pump to a VFD, and their monthly power use dropped by 22% without changing their production output.
I also see a lot of misconceptions around multistage pump power: some people think more stages always mean more power, but that’s only if you’re using the same flow rate. If you reduce flow, a higher-stage pump can actually be more efficient at low flow than a lower-stage one, because the impellers are smaller and less prone to recirculation at low flow. Another myth: newer pumps always use less power, but that’s only if they’re sized correctly for your system. I’ve seen brand new multistage pumps that were oversized, so they’re running way below BEP, wasting 40% of their power—same as an old pump that needs maintenance.
So, what can you do to lower your multistage pump’s power consumption? First, do a system audit, not just a pump audit. Measure your actual flow rate, total head, liquid properties, and friction losses, not just the numbers from the pump spec sheet. That will tell you if your pump is correctly sized for your needs. Second, run the pump at its best efficiency point (BEP) as much as possible. If your demand fluctuates, use a VFD instead of throttling valves, or add a smaller multistage pump to handle low-demand periods. Third, maintain your pump regularly: clean impellers to remove any buildup, replace worn seals and bearings, and check for leaks, which can cause the pump to work harder and waste power. Fourth, match the pump to your liquid: if you’re pumping high viscosity or abrasive liquids, opt for multistage pumps designed for those applications, which have larger passages and harder materials to reduce friction and wear.
If you’re still not sure how to calculate your pump’s power use, or if your current pump is costing you too much in energy bills, I work with customers every day to evaluate their multistage pump systems, identify inefficiencies, and recommend adjustments that cut power use without sacrificing performance. We don’t just sell pumps; we help you make the most of the equipment you already have, too.

If you’re looking to optimize your existing multistage pump’s power consumption, or if you need a new multistage pump sized for your specific application, feel free to reach out to discuss your requirements.
Positive Displacement Pump References
- Karassik, I. J., Messina, J. P., Cooper, P., & Heald, C. C. (2007). Pump Handbook (4th ed.). McGraw-Hill Education.
- Hydraulic Institute. (2019). Energy Efficiency Assessment for Centrifugal Pumps. Hydraulic Institute Standards.
- Miller, T. J. (2018). Centrifugal Pump Efficiency: A Practical Guide for Plant Engineers. Elsevier Science.
Zhejiang Kaicheng Pump Valve Co., Ltd.
Zhejiang Kaicheng Pump Valve Co., Ltd. is one of the most professional multistage pump manufacturers and suppliers in China, also supports customized service. We warmly welcome you to buy advanced multistage pump made in China here and get quotation from our factory. For price consultation, contact us.
Address: No.501 Zhangbao North Road, Dong ou Industrial Park, Oubei town, Yongjia, Zhejiang Province, China
E-mail: sales@cnkcmp.com
WebSite: https://www.kcmpumps.com/