{"id":3677,"date":"2026-11-09T22:53:07","date_gmt":"2026-11-09T14:53:07","guid":{"rendered":"http:\/\/www.siervosdemaria.com\/blog\/?p=3677"},"modified":"2026-11-09T22:53:07","modified_gmt":"2026-11-09T14:53:07","slug":"what-are-the-requirements-for-using-a-to-mount-in-aerospace-systems-4087-3d2f40","status":"publish","type":"post","link":"http:\/\/www.siervosdemaria.com\/blog\/2026\/11\/09\/what-are-the-requirements-for-using-a-to-mount-in-aerospace-systems-4087-3d2f40\/","title":{"rendered":"What are the requirements for using a TO &#8211; Mount in aerospace systems?"},"content":{"rendered":"<p>If you\u2019re deep into aerospace component sourcing (or even just someone who\u2019s ever stared at a rocket launch and wondered how tiny parts hold up to that chaos), you\u2019ve definitely heard of TO-Mounts. Wait\u2014if you haven\u2019t, TO-Mount is short for Transistor Outline Mount, right? It\u2019s that hermetically sealed, blocky little component package you see on everything from satellite communications gear to aircraft cockpit sensors, and yeah, we\u2019re one of the suppliers that works to make sure those little things don\u2019t let a $200 million mission go sideways. Over the years, we\u2019ve fielded so many calls from aerospace engineers asking, \u201cWhat\u2019s actually required for a TO-Mount to work up there?\u201d So today, I\u2019m breaking down the non-negotiables\u2014no stuffy spec sheets, just real-world stuff we\u2019ve learned working with NASA, commercial satellite teams, and military avionics folks. <a href=\"https:\/\/www.brandnewdiode.com\/single-emitter-laser-diode\/to-mount\/\">TO-Mount<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.brandnewdiode.com\/uploads\/201911086\/small\/16-bars-vertical-laser-diode-stack30167839390.jpg\"><\/p>\n<p>First off, let\u2019s talk about the big one that most new suppliers miss right out the gate: hermeticity. Aerospace? There\u2019s no air up there that\u2019s safe for electronics. Even low-Earth orbit has tiny micrometeoroids, solar wind, and wild pressure swings that would turn a regular plastic-packaged TO-Mount into a rusty, corroded paperweight faster than you can say \u201cmission abort.\u201d For context, a standard consumer TO-Mount might have a plastic seal that\u2019s fine for a phone, but in space? That seal can leak gas at a rate that lets moisture seep in over time. That moisture freezes when you swing into Earth\u2019s shadow, expands, and cracks the component\u2019s internal wires.<\/p>\n<p>Our team tests every TO-Mount we ship with what\u2019s called a fine helium leak test. The requirement? A leak rate of less than 1 x 10^-8 atm cc\/sec. No exceptions. We used to skip a full test on a batch once to hit a tight deadline, and got an emergency call from a customer whose satellite sensor was dying because a single TO-Mount had a leak rate of 2 x 10^-8. Total nightmare. Now, we don\u2019t even offer partial tests for aerospace\u2014if it\u2019s not hermetic to that spec, it doesn\u2019t leave our facility. That\u2019s non-negotiable.<\/p>\n<p>Next up, thermal performance. Aerospace components run hot\u2014like, really hot. A satellite in orbit can swing from -150\u00b0C on the dark side to +120\u00b0C in direct sunlight, and the TO-Mount\u2019s job is to move all that heat away from the tiny semiconductor chip inside. Your average off-the-shelf TO-Mount uses a lead frame made of cheap steel, but that\u2019s garbage for aerospace because it has terrible thermal conductivity and expands way too much when it heats up. When the chip inside expands at a different rate than the mount, you get stress cracks that break the wire bonds.<\/p>\n<p>So here\u2019s the thing: for aerospace, the TO-Mount\u2019s base plate has to be made of a material with a thermal conductivity of at least 200 W\/m\u00b7K, and its coefficient of thermal expansion (CTE) has to match either the semiconductor (usually silicon or gallium arsenide) or the PCB it\u2019s attached to. Most of our aerospace TO-Mounts use copper tungsten (CuW) or aluminum silicon carbide (AlSiC) for the base plate\u2014those materials hit that sweet spot. We also add a thermal interface material (TIM) between the mount and the heatsink, but that\u2019s extra. The core requirement is the base material. We had a customer last year who tried to save money on regular copper lead frames for a ground-test batch, and when they ran thermal cycling tests, 15% of the TO-Mounts failed within 100 cycles. Oops. That\u2019s the mistake we make with aerospace: cutting corners on thermal stuff, and it bites you every time.<\/p>\n<p>Then there\u2019s mechanical ruggedness. Let\u2019s be real, aerospace components don\u2019t get installed on a shelf and forgotten. They\u2019re on a rocket that\u2019s vibrating so hard during launch that you can barely hold a screwdriver, they\u2019re in satellites taking micrometeoroid hits, and they\u2019re in military jets that pull 9 Gs mid-maneuver. A standard TO-Mount might survive a gentle tap, but that\u2019s not enough here. The requirements for mechanical performance aren\u2019t just vague \u201cit needs to be tough\u201d\u2014they\u2019re specific.<\/p>\n<p>First, vibration testing: aerospace TO-Mounts have to pass random vibration of 20 g RMS from 20 Hz to 2000 Hz, plus a sine sweep of 10 to 2000 Hz at 5 g peak. We run every batch through that, no exceptions. We also test for shock: 1000 g shock pulses, 0.5 ms duration, three axes. And yes, micrometeoroid resistance. The TO-Mount\u2019s outer shell has to be thick enough\u2014we use a Kovar shell (that\u2019s an iron-nickel-cobalt alloy) because it\u2019s strong, hermetic, and CTE matches the base plate. Kovar doesn\u2019t crack easily when hit by tiny space debris, which is way better than cheaper alloys that shatter. I\u2019ve heard stories of a competitor\u2019s TO-Mount cracking during a high-altitude test because they used a thinner steel shell\u2014don\u2019t do that.<\/p>\n<p>Wait, let\u2019s not forget about radiation hardening. Space is full of ionizing radiation: solar flares, cosmic rays, all that stuff. When those particles hit a semiconductor inside a TO-Mount, they can cause single-event effects (SEEs)\u2014like a single-event upset (SEU) that flips a bit of data, or a single-event latchup (SEL) that fries the chip. For low-Earth orbit (LEO) satellites, that\u2019s annoying. For deep space missions, that\u2019s a mission killer.<\/p>\n<p>So aerospace TO-Mounts can\u2019t just be the regular industrial kind. They have to have a radiation-hardened semiconductor die inside, and the package itself has to provide at least some shielding. Our standard aerospace TO-Mounts have a Kovar shell that adds 0.5 mm of shielding, which is enough for LEO and medium Earth orbit (MEO). For deep space, we offer a reinforced version with 1 mm shell thickness and a radiation-hardened gallium arsenide (GaAs) die instead of silicon. We always ask customers where the component is going\u2014no use overbuying shielding for a satellite that only needs LEO protection, but skimping on a Mars rover would be a death sentence. We\u2019ve had a satellite operator come to us after a $50k batch of TO-Mounts they bought didn\u2019t have radiation hardening, and their entire payload failed in 6 months. Now they come to us first for all their space gear.<\/p>\n<p>Another thing that\u2019s super important: material purity. You might think, \u201cIt\u2019s just metal, how pure can it be?\u201d But in aerospace, even tiny impurities like carbon or sulfur in the Kovar or copper can outgas when exposed to the vacuum of space. That outgassed material can condense on optical lenses, solar panels, or sensitive sensors, turning a clear lens into a foggy mess. The NASA Standard Outgassing Test (ASTM E595) is non-negotiable here. Our materials have to have a total mass loss (TML) of less than 1% and a collected volatile condensable material (CVCM) of less than 0.1%. We test every incoming batch of metal for that\u2014no dirty metal gets turned into a TO-Mount for aerospace. I once had a supplier send us a batch of Kovar that had 0.2% CVCM, and we sent it right back. It would have contaminated a satellite\u2019s sensor within a year, and we\u2019re not gonna be the ones responsible for that.<\/p>\n<p>Oh, and let\u2019s talk about lead-free compliance? Wait, no\u2014wait a second, aerospace has its own rules here, right? RoHS is for consumer electronics, but aerospace has MIL-STD specifications, like MIL-STD-750 for semiconductors. Our aerospace TO-Mounts are compliant with MIL-STD-750, MIL-STD-883, and sometimes NASA GSFC specifications, depending on the customer. A lot of new aerospace engineers will try to use regular RoHS-compliant TO-Mounts, but those don\u2019t meet the thermal, hermetic, and radiation specs. We make sure every part we ship comes with a full spec sheet that clearly lists which standards it meets\u2014no fine print, no surprises.<\/p>\n<p>Wait, here\u2019s a common mistake customers make: they underrating temperature cycles. Aerospace components go through thousands of temperature swings, not just a few test cycles. For example, a satellite in LEO might go from -120\u00b0C to +80\u00b0C every 90 minutes, that\u2019s 16 cycles a day, 5840 cycles a year. So the TO-Mount has to survive at least 1000 temperature cycles from -65\u00b0C to +150\u00b0C, which is our standard. We tested a batch once that only passed 500 cycles, and we caught it before shipping\u2014would\u2019ve failed after a year in space. That\u2019s the kind of quality control we do.<\/p>\n<p>Now, let\u2019s get real about cost. I know aerospace teams are on tight budgets, but cutting corners on TO-Mounts is like using a rubber band to hold up a rocket. We\u2019ve had a customer come to us saying they saved 20% on TO-Mounts, but their satellite launch got delayed 3 months because half the parts failed testing. The extra cost for a qualified aerospace TO-Mount is nothing compared to the cost of a launch delay or a failed mission. We work with teams to find the right balance\u2014if they\u2019re on a tight budget for a LEO satellite, we can offer a standard MIL-TO-Mount, not the deep-space heavy-duty kind. We don\u2019t upsell, we just give them what they need, because we know the alternative is way worse.<\/p>\n<p>And let\u2019s not forget traceability. Aerospace requires full traceability for every single part, all the way back to the raw material. If something goes wrong with a batch, you need to be able to track every TO-Mount, who made it, what materials were used, which tests it passed. Our facility has a full traceability system\u2014every batch has a unique lot number, and we keep records of every test, every material shipment, every inspection. NASA actually audits our records sometimes, and we\u2019ve never had a failed audit. That\u2019s how serious we are about this.<\/p>\n<p>At the end of the day, when you\u2019re picking a TO-Mount for aerospace, it\u2019s not just a component\u2014it\u2019s a critical part of the mission. You can\u2019t just grab the cheapest off-the-shelf one and hope for the best. You need hermeticity below 1e-8 atm cc\/sec, a CTE-matched high-thermal-conductivity base plate, vibration and shock resistance that meets MIL-STD, radiation hardening for the environment, outgassing compliance, and full traceability.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.brandnewdiode.com\/uploads\/202211086\/small\/5w-808nm-to-mount-laser-diode00465440827.jpg\"><\/p>\n<p>If you\u2019re an aerospace engineer, procurement manager, or someone who needs TO-Mounts that work in space, aircraft, or any high-stress aerospace system, we\u2019re the supplier you need. We\u2019ve been doing this for over a decade, worked on everything from small CubeSats to military avionics, and can help you pick the right TO-Mount for your exact application\u2014no jargon, no hidden fees, just parts that will keep your mission on track. Reach out to us, and we\u2019ll walk you through everything you need.<\/p>\n<p><a href=\"https:\/\/www.brandnewdiode.com\/fiber-coupled-diode-laser\/1064nm-fiber-coupled-diode-laser\/\">Butterfly Laser Diode<\/a> References<\/p>\n<ol>\n<li>NASA Goddard Space Flight Center. (2020). General Specification for Spacecraft Component and Material Outgassing Requirements (NASA\/GSFC-STD-7000).<\/li>\n<li>Department of Defense. (2019). Test Method Standard for Microcircuits (MIL-STD-883H).<\/li>\n<li>JEDEC Solid State Technology Association. (2021). Standard Test Method for Fine Helium Leak Testing of Hermetic Solid State Devices (JEDEC JESD22-A120).<\/li>\n<li>Aerospace Industries Association. (2018). Guidelines for Qualification of Electronic Components for Space Applications.<\/li>\n<li>Copper Development Association. (2022). Thermal Performance of Electronic Packaging Materials for Aerospace Applications.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.brandnewdiode.com\/\">Hangzhou Brandnew Technology Co., Ltd.<\/a><br \/>Hangzhou Brandnew Technology Co., Ltd. is one of the leading to-mount manufacturers and suppliers in China, has a professional factory which manufacturers high quality to-mount and sells at competitive price. Welcome to wholesale our products made in China.<br \/>Address: 17F,Building 2, Aoqiang Mansion, No. 6 Xiyuan 5th Rd,310030 Hangzhou,China<br \/>E-mail: admin@brandnew-china.com<br \/>WebSite: <a href=\"https:\/\/www.brandnewdiode.com\/\">https:\/\/www.brandnewdiode.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019re deep into aerospace component sourcing (or even just someone who\u2019s ever stared at a &hellip; <a title=\"What are the requirements for using a TO &#8211; Mount in aerospace systems?\" class=\"hm-read-more\" href=\"http:\/\/www.siervosdemaria.com\/blog\/2026\/11\/09\/what-are-the-requirements-for-using-a-to-mount-in-aerospace-systems-4087-3d2f40\/\"><span class=\"screen-reader-text\">What are the requirements for using a TO &#8211; Mount in aerospace systems?<\/span>Read more<\/a><\/p>\n","protected":false},"author":75,"featured_media":3677,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3640],"class_list":["post-3677","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-to-mount-4d15-3d6346"],"_links":{"self":[{"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/posts\/3677","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/users\/75"}],"replies":[{"embeddable":true,"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/comments?post=3677"}],"version-history":[{"count":0,"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/posts\/3677\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/posts\/3677"}],"wp:attachment":[{"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/media?parent=3677"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/categories?post=3677"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.siervosdemaria.com\/blog\/wp-json\/wp\/v2\/tags?post=3677"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}